EN
GETTING STARTED
Welcome to your new EK7000. To capture videos and photos, you need a memory
card (sold separately).
MEMORY CARDS
Use brand name memory cards that meet these requirements:
• Class 10 or UHS-I rating.
• Capacity up to 64GB (FAT32).
Note: Please format the memory card first in this camera before using. To keep your
memory card in good condition, reformat it on a regular basis. Reformatting erases
all of your content, so be sure to offload your photos and videos first.
POWERING ON / OFF
To Power On:
Press and hold the Mode button for three seconds. The camera beeps while the
camera status light is on. When information appears on the LCD display or the
camera status screen, your camera is on.
To Power Off:
Press and hold the Mode button for three seconds. The camera beeps while the
camera status light is off.
SWITCHING MODE
To Switch Mode:
Press the Mode button to switch the mode.
To Exit Mode:
Press the Mode button to exit mode.
TURNING ON / OFF Wifi
To Turn On Wifi
Turn on camera, press Down button once. Wait for 3 seconds. The screen shows
'SSID: iCam-xxxx'. Then you turn on Wifi successfully.
To Turn Off Wifi
Press Down button to turn off Wifi.
05