Motorola Solutions PMLR6833 Guia Del Usuario página 6

6. Press and hold down the Push-to-Talk (PTT) button or if
applicable, select Voice Activation (VOX) and begin speaking
in order to transmit.
Note: Your microphone will return to the receiving mode when you
release the PTT button after you finish speaking.
You may actually feel the Heavy Duty Temple Transducer shake
or vibrate when the receive volume is too high. For more
comfortable use, set the receive volume to an appropriate level
on your portable radio. If the receive audio is not loud enough
(such as in a very noisy environment), use foam or rubber
earplugs. When you use foam or rubber earplugs, you may or
may not have to increase the receive volume to achieve a higher
receiving audio from the Heavy Duty Temple Transducer.
Location to Attach Heavy Duty Temple
Transducer to Module Interface
Location to attach the Heavy Duty Temple
Figure 3:
4
Transducer