Publicidad
Idiomas disponibles
Idiomas disponibles
Mendler Vertriebs-GmbH
Industriestr. 60
D-73642 Welzheim
Telefon: 07182 804020
Fax: 07182 8040220
fragen@heute-wohnen.de
www.heute-wohnen.de
Parts description:
3 - 10
Assembly with 2 people.
Place the side panel 1 on the floor with the holes facing up.
To get better stability, it is advantageous to glue the dowels in their holes. You can
use commercially available wood glue for this.
ONLY insert the glue into the holes for the wooden dowels. Take the frame 4 and
insert it with the dowels in the holes provided.
Fastening point for the frame 4 , on the side part 1 are points a and b.
Now take the back section 3 and attach it to the attachment points c and d as you
have attached the frame 4 to the side section 1. Then carefully lift the scaffold so
that you can insert the screws from the outside of the side part 1 into the hole
provided and screw them tight.
Attention: The bench cannot be dismantled again when gluing!
Take the side part 2 and connect it to the construction that resulted previously. To
do this, it is best to carefully put the frame back on the outside of the side part 1.
Finally, place the seat in the frame.
Publicidad
