Transport And Storage; Operation - Wolf Garten Li-High Energy 72V Instrucciones De Funcionamiento Originales

Transport and storage

All manuals and user guides at all-guides.com
Structure
MTD Products AG MTD Products AG
Industriestr. 23 Industriestr. 23
66129 Saarbrücken
66129 Saarbrücken
Li-High Energy 72V
xxxxxxxxxxxxxx 72V
196-xxx-xxx 196-650-650
xxxxxxxxxxx AxxxxMTxxxx
Nominal voltage / capacity:
Nominal voltage / capacity:
Max. charge voltage:
Max. charge voltage:
Max. charge current:
Max. charge current:
1 Manufacturer
2 CE label
3 Model name
4 Model number
5 Serial number
6 Read instruction manual
7 Rated voltage / Kind of current
8 Cell type
9 Rated current
10 Maximum charging voltage
11 Maximum charging current
12 Disposal note
13 Year of manufacture
14 Symbol "Recycling"
15 Lithium‑ion power pack
Transport and storage
Transport
Note
Li‑ion power packs and batteries
are subject to the requirements
of the dangerous goods act. The
user can transport the power
packs by road without further doc‑
umentation. If sending via a third
party (e.g. airfreight or freight for‑
warding) special requirements in
respect of packaging and labelling
must be observed. In this case,
refer to a hazardous goods expert
for preparation of the package.
Li-High Energy 72V
INR18650-25 RM
xxxxxxxx-xxx
xxxxx V / x,x Ah
2x 36 V / 2,5 Ah
xx V
42 V
x A
6 A
Only send the power pack if the casing
Î
is undamaged.
‑ Apply insulating tape to open contacts.
‑ Pack the power pack so that it cannot
move within the package.
It may be necessary to adhere to other
Î
related national regulations.
Storage
Charge the power pack before storage.
Î
Charge the power pack after a long
Î
period of disuse.
Store the power pack and charger
Î
separately.
Store the power pack in a cool and
Î
dry location (recommended storage
temperature approx. 18 °C).

Operation

WArNING !
Risk of injuries or material
damage.
¾ Only charge the power
pack with charger
POWER Base 72V /
POWER Base 72V Basic.
The power pack is supplied
partially charged. Before first use,
fully charge the power pack using
the charger POWER Base 72V /
POWER Base 72V Basic to ensure the
full capacity of the power pack.
Note
The power pack becomes hot
during operation.
Charging indicator light
The power pack has a charging indicator
light, that shows the power pack charge
capacity.
Press the small black button on the
Î
power pack to read off the charge
capacity.
3 The charge capacity is indicated by the
LEDs.
Note
EN
9