Lionelo care Babyline 7.1 Manual De Usuario página 7

Transmitter (Fig. 2)
1.
Light sensor
2.
Camera lens
3.
Infrared LEDs
4.
LED power indicator
5.
Microphone
Warnings
1.
Installation may only be carried out by an adult. Keep smaller parts of
the set out of reach of children.
2.
This product is not a toy. Don't let children play with it.
3.
An electronic nanny is not a substitute for proper care and parental care.
4.
Do not place the baby monitor and its cords in the playpen or at your
fingertips. Place them at least a meter apart.
5.
Keep all cables out of the reach of children.
6.
Do not place the nanny near water or a source of fire.
7.
Use only the adapters included in the kit.
8.
Do not touch the plug contacts with sharp or metal objects.
Introduction
Camera power supply (fig. 3).
Connect the charger cable to the camera's power connector (7). Connect the
battery to the power supply.
Attention! Use only the adapters provided in the kit.
The LED on the camera will light white.
Monitor power supply (fig. 4).
The product is equipped with a battery, thanks to which it is possible to
operate without access to the network.
Connect the charger cable to the monitor's power connector (9), then connect
the battery to a power outlet. The charging LED (5) will light up, which means
that charging has started.
Attention! Use only the adapters provided in the kit.
Use
To turn on the product, press the power button on the monitor (2).
Position the camera in a convenient location and tilt it towards the place you
6.
Bedside lamp
7.
Power connector
8.
Speaker
9.
Pairing button
10. Temperature sensor
‑ 7 ‑ EN