Publicidad
Idiomas disponibles
Idiomas disponibles
REGULATION
The flow is regulated through the control knob, built in the rotor chamber, where the water
suction is also located. -fig. 6-.
MAINTANEANCE
ATTENTION: BEFORE ANY KIND OF INTERVENTION, ALWAYS DISCONNECT ELECTRICAL
SUPPLY OF THE PUMP AND ANY OTHER APPLIANCE PLACED IN THE WATER.
• Regular cleaning and maintenance will guarantee the pump better and longer performance.
• With one hand hold the pump assembly, with other hand remove the external magnet to
release. (use the appendix on the outside of the suction cup to help you in this operation).
• Disassemble as shown. - Fig. 5/5a -
• Clean the impeller assembly removing deposits with a soft brush. Do not use detergents or
solvents.
• Reassemble everything in reverse order, make sure the notches on the pump chambers
correspond and that the shaft is placed correctly.
• In case of abnormal noise and /or reduced performance caused by sudden changes in
electricity supply, it is sufficient to restart the pump.
GUARANTEE
This product, all its parts and accessories are covered by warranty within the limits provided
for in this paragraph and the legal regulations currently in force. The guarantee only covers
manufacturing defects and includes the repair or replacement of the product free of charge.
The guarantee does not cover damage and/or defects caused by carelessness, wear, unsuitable
usage not complying with the instructions and warnings in this manual, accidents, tampering,
incorrect use, bad repair work or purchases not accompanied by a fiscal receipt.
AVVERTENZE PRELIMINARI
!
!
• Attenzione. La famiglia di pompe è stata
concepita per un utilizzo esclusivamente in
acquariologia e non può essere impiegata
come pompa di filtraggio. Per qualsiasi utilizzo
differente dal sopraccitato si prega di contattare
il rivenditore.
• Prima di mettere in funzione il prodotto,
verificare l'integrità di tutte le sue parti e
soprattutto che cavo e pompa non risultino in
qualche modo danneggiati. Scollegare dalla
rete tutti gli apparecchi elettrici sommersi
prima di immergere le mani in acqua e prima
di qualunque manutenzione. Verificare che la
tensione riportata sul prodotto corrisponda a
quella della Vostra rete.
Italiano 9
Publicidad
