Descargar Imprimir esta página

Safety Instructions - auna Blaster DAB Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

SAFETY INSTRUCTIONS

Read these instructions. All uses guidelines must be read before using the
device. Keep the instructions for future use.
Read all the safety in for mation and instructions before using the
product. When passing this product to some one, include all documents.
If you do not follow the operating instructions provided, it may
compromise the safety of your product and this may invalidate the
warranty.
Do not expose the product to dripping or splashing .Do not place
objects filled with liquids,suchas vases ,on the product.
If liquid or water spills onto the product ,switch it off immediately and
contact your dealer.
If you are using a mains-powered adapter ,do not touch the product
with wet hands.
The internal battery in this product is not user replaceable .Do not
expose the battery to excessive heat or naked flames. Ensure adequate
ventilation and airflow around the product , particularly when charging.
Dispose of the product in accordance with localenvironmentalrules.
Using the product inrooms or climates withhighhumidity and
temperatures may cause condensation to form inside the product,
which candamage the product. Use the product in moderate climates
only.
Do not use your product in extremely hot or cold temperature . Keep the
device away from heat sources , suchas radiators or gas/electric fires.
Do not expose your product to naked flames, suchas lighted candles.
To charge your product ,only connect it to a supply source that meets
the safety
Isolation requirements of EN 62368-1 or EN 60950-1 for an accessible
safety extra low voltage circuit. For this connection ,use either the
supplied Type-C cable or a suitably CE approved power adapter with
the correct USB output rating.
Power the product using anexternal5 V DC 1 A power supply. The
maximum output current is 1 A, protected by an internal circuit.
Before you charge your product ,ensure that the available supply
voltage corresponds with the required operation al voltage of the
product.
Disconnect your product from the charging power supply if you will not
use your product for a long period of time (for example, if you are going
on holiday).
Always unplug your product from the charging power supply before
cleaning. When cleaning the product ,do not use any type of abrasive
EN
21

Publicidad

loading

Este manual también es adecuado para:

100383621003836310038364