Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Connection
Carefully unpack the unit and all accessories and remove the packing
material. Connect the power cable to a normal household power socket.
Press ON/OFF to turn the device on.
Basics
•
Select mode: Press MODE or FUNCTION repeatedly to select between
FM, DAB CD, USB, SD, BT and Phono modes.
•
Volume: Adjust the output volume with the VOL+/- buttons.
•
Line out: If you have connected the unit to a stereo system/PA or other
audio device via RCA cable, switch on the line out on/off switch on the
back.
•
Setting the time: After switching on, the display shows the time 00:00.
Press and hold PROG for 3 - 5 seconds to select between the 12H or
24H display formats. Use the arrow keys to select, then press PROG
to confirm. The hour digits now flash. Set the hour using the arrow
keys and press PROG to confirm and continue. Repeat for the minutes.
Please note: the time is not saved when the unit is disconnected from
the mains.
FM RADIO
Roll out the antenna on the back of the unit completely. After switching
on, select the radio mode (FM) with MODE. Use the arrow keys to set the
desired reception frequency (shown on the display). To store the current
station (20 memory locations are available), press PROG and then use the
arrow keys to select the desired memory location. Press PROG again to
confirm and continue.
EN
21
Publicidad
