Initializing; Navigation - G-Systems GSE Manual De Instrucciones

All manuals and user guides at all-guides.com
Manual AC-EC LCD fan controller 2x5A
Connect the AC/EC fan controller to the power.
The power LED blinks and the fan starts to initialize This takes a few
seconds. As first you will see a screen with all the LCD segments and back-
light working.
EN
Next it starts initializing the sensor and in case this screen stays at this
stage, there is a fault with the sensor or the communication it self. Check the
connection from the sensor to the device. If it is still faulty return the device
to be repaired.
Otherwise you will find in a few seconds the the measured value, fan
speed bar and day/night stage.
With the rotary push button you can navigate thru the menu. Turn
clockwise to go to the next step or increase values, or counter clock wise to
return or decrease values. Push on the knob to SELECT and SAVE.
PUSH
36

Initializing

min. max .

Navigation

SELECT
ROTATE
SAVE
NAVIGATE