Descargar Imprimir esta página

Safety Instructions - auna Worldwide CD Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

SAFETY INSTRUCTIONS

Read all the instructions carefully before using the unit and keep them
for future reference.
Check that the voltage marked on the rating label matches your mains
voltage.
The unit must be placed on a flat stable surface and should not be
subjected to vibrations.
Do not place the unit on sloped or unstable surfaces as the unit may fall
off or tip over.
The mains socket must be located near the unit and should be easily
accessible.
Avoid extreme degrees of temperature, either hot or cold. Place the
unit well away from heat sources such as radiators or gas/electric fires.
Avoid exposure to direct sunlight and other sources of heat.
Never place any type of candle or naked flame on the top of or near the
unit.
To reduce the risk of fire, electric shock or product damage, do not
expose this unit to rain, moisture, dripping or splashing. No objects
filled with liquids, such as vases, should be placed on the unit.
If you spill any liquid into the unit, it can cause serious damage. Switch
it off at the mains immediately. Withdraw the mains plug and consult
your dealer.
To prevent the risk of electric shock or fire hazard due to overheating,
ensure that curtains and other materials do not obstruct the ventilation
vents.
Do not install or place this unit in a bookcase, built-in cabinet or in
another confined space. Ensure that a minimum of 10cm should be kept
around the unit for ventilation.
Safety
Always disconnect the unit from the mains supply before connecting/
disconnecting other devices or moving the unit.
Unplug the unit from the mains socket during a lightning storm.
This unit will become warm when used for a long period of time. This is
normal and does not indicate a problem with the unit.
Mains Adapter
Make sure the unit is not resting on top of the mains cable, as the
weight of the unit may damage the cable and create a safety hazard.
If the mains cable is damaged it must be replaced by the manufacturer,
its service agent, or similarly qualified persons in order to avoid a
hazard.
EN
37

Publicidad

loading

Este manual también es adecuado para:

1003275510032756