Airlink KVM-102UA Guia De Inicio Rapido página 5

USB "KVM-in-the-Cable" Operation Quick Reference
There are three methods to control your KVM Switch for PC and Audio/Mic
channel selection: using (1) the front-panel push button, (2) a hotkey
sequence or (3) the KVM Switcher Software.
Face-panel button
The face-panel button allows you a direct control over KVM switching
operation. Simply press the button to switch to the next connected PC and
audio/mic channel (if binding is enabled). By default, PC port switching and
audio/mic port switching are bound together.
You can use the front panel button to switch to an empty port that is
not connected with any computer. Normally, if you use keyboard hotkeys
or the KVM Switcher software, you will not be able to switch to an empty
port.
Keyboard hotkeys
User-definable hotkeys for PC selection:
Hotkey sequence = Ctrl + Alt + [command key]*
* Please refer to next section for keys that are qualified to be used as a command key
Universal hotkey for PC toggle-switching:
Both the universal hotkey, ScrLk + ScrLk and the user-definable
hotkey, Ctrl + Alt + [command key] WILL NOT allow you to switch to an
empty port that is not connected with any computer. To force your KVM to
switch to an empty port, just press the front-panel button to switch.
Universal Hotkey sequence = ScrLk + ScrLk
* For operating systems other than Windows, you can still use this special hotkey to
facilitate PC switching.
Each keystroke within a hotkey sequence should be pressed within 2
seconds. Otherwise, the hotkey sequence will not be validated.
OvisLinkCorp.
All manuals and user guides at all-guides.com
KVM-102UA
English
4
4