Descargar Imprimir esta página

After Cleaning; Remove And Replace Clean Water Solution Tank - Hoover fh50800 Manual Del Propietário

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING
!
®
Use only Hoover
cleaning products intended for
use with this machine. (see the "Cleaning
Products" section of this manual).
Helpful Hints for Cleaning Carpet
1. Do not oversaturate carpet with cleaning solution
while using the carpet cleaner.
2. For heavily soiled areas, additional applications
may be necessary.
3. Allow plenty of time to dry carpet thoroughly.
4. Wipe cleaning solution from woodwork and wood
to prevent any damage.
5. Try not to walk on carpet until it is completely dry.
6. After carpet is thoroughly dry, vacuum the carpet
using a cleaner with a revolving brushroll.

reMove and replaCe Clean water solution tank

CAUTION
!
Do not fill with water above 140
2.5 Press clean Clean Water Solution Tank button
(Diagram A). Tilt Clean Water Solution Tank away
from cleaner and remove (Diagram B).
2.6 Unscrew cap from back side of Clean Water
Solution Tank and remove.
IMPORTANT
Fill with clean water BEFORE adding detergent.
2.7 Tilt tank in sink to avoid leakage from breather
hole (C). Fill with water until "Water Fill" line
indicated on the side of the tank is reached.
2.8 Next, locate your bottle of Hoover
Cleansing detergent. Fill the rest of the Clean
Water Tank with solution to "Detergent Fill" line
indicated on the side of the tank is reached. Once
filled, replace cap on tank. noTe: Filling tank with
detergent before water is not recommended and
may cause foaming.
2.9 Place bottom of Clean Water Solution Tank into
cleaner and position until the lever snaps into place.
WARNING
!
Use only Hoover
®
cleaning products intended for
use with this machine. (see the "Cleaning
Products" section of this manual).
All manuals and user guides at all-guides.com
7. Before cleaning, determine where you will start
!
and end, making sure not to walk over previously
cleaned areas.

after CleaninG

• Allow carpet to dry completely. Try not to walk on
the carpet until it is dry.
• If you need to walk on the carpet, place white
towels on the areas you want to walk.
• If the carpet is not dry and the furniture must be
placed back in the room, use plastic or foil under the
furniture to prevent staining the carpet.
• Thoroughly clean the dirty water tank with hot tap
water. See page 10.
!
o
F (60
o
C)
®
Deep
!
7
CAUTION
!
Store appropriately indoors in a dry place. Do
not expose machine to freezing temperatures.
2.5
A
2.6
2.8
Detergent Fill
Water Fill
!
b
2.7
Detergent Fill
Water Fill
C
2.9

Publicidad

Solución de problemas

loading