Care And Cleaning; Technical Data - Beaba SterilExpress Folleto De Instrucciones

CaRE aND CLEaNING

Before cleaning your sterilizer always ensure you have disconnected the
plug from the unit, or the wall socket. Make sure the unit is not hot, wait at
least 30 minutes after the last time you used the sterilizer.
• For reasons of hygiene, after each use simply clean the bottom of the tank, once
it has cooled, with a damp cloth.
• The body of the unit can be wiped with a soft damp non-abrasive cloth. Do not
immerse in water.
• Remove the bottle holder from the sterilizer and wash in warm soapy water. Wipe
away any deposits left in the unit using a soft clean cloth.
• When the water is very hard, scale may form. To guarantee that the appliance conti-
nues to work properly, we advise you to descale the appliance every 15 days.
To do this:
- Fill the water measure cup up to the 120 ml mark with 50% water and 50% white
household vinegar.
- Pour the liquid into the base of the sterilizer and turn it on for one complete cycle.
- Wait for the sterilizer to cool down (about 20 minutes) and then complete another
cycle using only water.
RECOMMENDaTIONS
• It is important that you use the correct amount of water or the cycle time will vary.
• The sterilization time is based on using 9 bottles; however the cycle time will
increase when using fewer bottles.
• Before first use, complete a cycle with 120 ml water, without any bottles or
accessories.
• When using your sterilizer for the first time you will find that the power light
is on and the unit begins its cycle. This is not a fault. Please leave the unit to
complete this first cycle. after the first cycle the unit will automatically switch off
and is ready for use when cool.
INFORMaTION
• Your sterilizer will accept up to 9 standard or 6 wide neck type bottles including
their accessories.
• The heat sensitive safety handle changes colour to show that the lid is hot during use.
• Steril'express will keep bottles sterile for up to 6 hours providing that the lid is not
removed and the handles remain locked.

TECHNICaL DaTa

Voltage: 230 V - Rating: 1000 W
Beaba notice steril express v4.indd 8
All manuals and user guides at all-guides.com
8
GUaRa
In additio
event, Be
manufac
The warr
product
The guar
It does n
instructio
BeaBa w
resulting
Calling a
We rese
colour sp
This doc
07/05/10 10:04