Technical Data; Utilisation - Powerfix Profi PPR 4 B2 Instrucciones De Uso

Technical Data

Max. operating
pressure: 4 bar
Attachments: Attachment Ø 6 cm
Attachment Ø 5 cm
WC Attachment
Shower attachment

utilisation

1. Select the most suitable attachment
/ for the blocked pipe and place it on
the air exit opening
Ensure that it is firmly secured.
2. Remove the sieve or any other inserts from
the pipe.
3. Close and seal all openings, for example
overflows, on the pipe to be cleared. Use
the overflow seal for the overflows
■ With round overflows, press and hold the roll
pin so that the locking lever can be flapped in
such a way that it stands in extension with the
roll pin (Fig. 1).
Fig. 1
■ Guide it into the overflow. As soon as the lo-
cking lever hits against the rear wall, it opens
itself out (Fig. 2).
Fig. 2
PPR 4 B2
All manuals and user guides at all-guides.com
■
/ /
.
■
:
■
■
■
Slowly release the roll pin and check to
ensure that the overflow is completely closed.
The edges of the overflow seal
as uniformly as possible around the overflow,
otherwise residual soiling could be pressed
out.
Fig. 3: Correctly inserted overflow seal
For elongated overflows, press the roll pin
and tip the locking lever so that it stands at
right angles to the roll pin (Fig. 4).
Fig. 4
Guide it into the overflow.
Turn the roll pin through 90° and slowly
release it (Fig. 5).
Fig. 5
Check to ensure that the overflow is comple-
tely closed. The edges of the overflow seal
must close as uniformly as possible around
the overflow, otherwise residual soiling could
be pressed out.
must close
GB │ IE │ 9 ■