Tool Specifications; Machine Elements; For Your Safety - Bosch PBS 60 Instrucciones De Servicio

Tool Specifications

Belt sander
Order number
Rated power
Output power
No-load belt speed
Length of sander belt
Width of sander belt
Belt speed preselection
Connection for self/external dust
collection
Weight (without accessories),
approx.
Protection class
Please observe the order number of your machine. The trade names of the individual machines may vary.

Machine Elements

1 Auxiliary handle
2 Clamping lever
3 Belt speed thumbwheel
(PBS 60 E/PBS 75 AE)
4 On/Off switch
5 Lock-on button for On/Off switch
6 Dust box (micro filtersystem)
7 Extraction adapter
8 Outlet piece
9 Latching lever
10 Filter element (micro filtersystem)
11 Adjustment knob for belt position
12 Thread
13 Protective cap
14 Dust passage
Not all of the accessories illustrated or described are
included as standard delivery.

For Your Safety

Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
general safety notes in the enclosed booklet
must be observed. Before using for the first
time, ask for a practical demonstration.
Wear protective goggles, ear protection and a
dust protection mask.
8 • 2 609 932 116 • TMS • 28.02.03
All manuals and user guides at all-guides.com
PBS 60
0 603 275 1.. 0 603 275 6.. 0 603 270 2.. 0 603 270 5..
[W] 550
[W] 300
[m/min] 280
[mm] 400
[mm] 60
–
[kg] 2.1
/ II
English - 1
PBS 60 E PBS 75 A
550 710
300 350
230 – 280 300
400 533
60 75
–
2.1 3.2
/ II / II
Wear protective gloves.
For long hair, wear hair protection. Work only
with closely fitting clothes.
If the mains cable is damaged or cut through
while working, do not touch the cable but im-
mediately pull the mains plug. Never use the
machine with a damaged cable.
Connect machines that are used in the open
via a residual current device (RCD) with an ac-
tuating current of 30 mA maximum. Do not op-
erate the machine in rain or moisture.
Always direct the cable to the rear away from
the machine.
Apply the machine to the workpiece only when
switched on. Switch off the machine only after
it has been lifted from the workpiece.
Always switch the machine off and wait until it
has come to a standstill before placing it down.
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
The machine can be used only for dry sanding.
Do not work with materials containing asbes-
tos.
Do not continue to use worn, torn or clogged
sanding belts.
Care should be taken to ensure that the oper-
ator or foreign objects do not come into contact
with the running sanding belt.
PBS 75 AE
710
350
200 – 300
533
75
3.2
/ II