Publicidad
Idiomas disponibles
Idiomas disponibles
SLIM FIT
OPTIONAL: To ensure the connection cable is not loose on the cabin roof
C
Retighten the nuts to a torque of 4.75 Nm.
BEWARE: Check that all cables are connected
correctly.
D
Reassemble the cover and tighten with a torque
of 3.3 Nm.
4
Position the unit on the seal, inserting the interior
distribution panel in the hatch gap.
Caution! When positioning the unit above
the hatch gap, check that the drains are not
blocked by the EPDM seal.
B
Hatch
25
EN
4
Publicidad
