Operating - Beem Miracle Mop 10in1 Manual De Instrucciones

EN
Attaching the additional nozzle
(see image F4)
Attach the desired nozzle (23, 24, 25,
‹
28, 29) to the adapter or the extension
hose and turn the nozzle clockwise to
lock it.
The nozzle can be removed again by
‹
turning anti-clockwise and pulling.
NOTE
► The fabric brush (28) can also be
used with the microfibre cloth (see
image F7).
Mounting the window attachment and
table brush (see images F5 and F6)
Attach the fabric brush without microfi-
‹
bre cloth.
To attach the window attachment (21)
‹
or the table brush (22), hook the fabric
brush (28) into the attachment and fold
down until it snaps in.
Fix the corresponding microfibre cloth
‹
to the table brush (22).
To remove, release the locking tab and
‹
pull off the attachment.
BEEM - Elements of Lifestyle
All manuals and user guides at all-guides.com
General
Before beginning with cleaning, read the
instructions on caring for the material to be
cleaned.
Use an unexposed area to check for toler-
ance of the material against steam.
Cleaning coated or painted surfaces
Prolonged exposure to steam can cause
wax, furniture polish, plastic coatings or
paint to flake off and cause staining. Clean
kitchen and living room furniture, doors,
parquet, coated or plastic-coated surfaces
only with the microfibre cloth and do not
wipe an area too long, otherwise damage
can occur, particularly on natural parquet
and similar sensitive surfaces.
Cleaning glass
Do not clean glass at low outdoor tempera-
tures. The hot steam can tension the glass
surface and shatter the glass.
Miracle Mop 10 in 1

Operating

Instructions
23