Display Features - Southwire Elite 300 Serie Instrucciones De Funcionamiento Y Mantenimiento

DISPLAY FEATURES

DISPLAY FEATURES
LCD Screen
To turn the LCD Screen display on, press any of
the output buttons once (LED/DC/USB/AC).
Press desired output button again to turn the
output power on. An output icon will appear on
the LCD Screen. Ensure you press the output
button again to turn off the power supply (this will
help maintain battery level)
Power Level Percentage
Check the battery level by pressing any of the
input buttons once. The LCD Screen will turn on
and show the battery level. If the battery is below
20%, charge before using.
Power Input & Output (Watts)
If the Elite 300 total output exceeds 300 Watts, it
INPUT
will automatically shut off. Please ensure the
OUTPUT
power consumption is less than 300 Watts, then
press the output button.
Low Power Warning
When the remaining power is less than 10%, the
battery level icon will blink 10 times.
Low & High Temperature Warning
The Elite 200 powers devices at a temperature
range of 0°C - 45°C ( 32°F - 113°F).
If your working temperature is outside this range,
the Southwire Elite 300 Series may work at
reduced efficiency or stop working.
DC INPUT
All charging methods use the DC Input port. The exception is when
using PD for charging.
Connect your adapter first then plug it into the DC input of the Elite 300,
this will start charging the unit.
3
DISPLAY FEATURES
4