Overview Of The Menus; Important - Leelbox H.265 Manual Del Usuario

Once the choice is made select CHANNEL SEARCH using the arrows key, then press OK to start
the automatic search of the channels. Pressing EXIT the main menu is open.
The operation may take a few minutes. At the end of the search, the decoder may require the
choice between two channels that would occupy the same position, to make the choice use
the arrow keys and finally the OK key. If no choice is made the first channel will be selected.
IMPORTANT NOTES
In the event that the channels stored in the search are not arranged according to the national
standard which provides for their ordering according to their importance (RAI 1 on channel 1;
RAI 2 on channel 2; RAI 3 on channel 3, RETE 4 on Channel 4 ; CANALE 5 on channel 5; ITALIA 1
on channel 6; LA7 on channel 7 ...), means that the LCN function is not active. To activate the
LCN order, please follow the instructions in the following chapter (PROGRAM).

Overview of the menus

The main menu is divided in 7 submenus: PROGRAM, PICTURE, SEARCH, TIME, OPTION,
SYSTEM and USB. Access to the main menu is by pressing the MENU button on the remote
control. Using the arrows keys, you can open the various submenus.
Program
This menu allows you to sort, modify and delete the stored channels. To open the menu
PROGRAM, select the first icon bottom from the left.
In this menu it is possible to activate the "LCN" function: select with the arrow keys SORT and
select between the different options BY LCN, then activate the LCN, selecting LCN and ON, as
in the picture above; so, the channels will be arranged according to national importance. The
factory setting provides that the channels are automatically arranged according to LCN, and
the LCN sorting is active, just like in the image above.
IMPORTANT: to activate sorting by LCN both the sorting by LCN (SORT: BY LCN) and LCN
activation (LCN: ON) must be selected.
Picture
This menu allows you to change the image display format. The format is set automatically
according to the TV to which the decoder is connected. If not, select 576I / P or 702P if you
are using a TV with only the SCART socket, or 1080i / p if you are using a TV with a HDMI
socket (1080p gives the maximum video resolution, but not all TVs support it). This menu
also allows you to change the SCART output (TV-SCART), the display on the decoder via
8