Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
To Load and Play a Disc
When you press the POWER button the
system turns on in DVD mode. Put the disc's
printed-side facing the rear of vehicle into
the disc compartment, about halfway into
the slot. The disc will load automatically and
begin to play. (Some discs may start at the
root menu, where play must be selected to
start movie.) Depending on the disk and
playback location on the disc, the icon may
be displayed in the upper-left corner of the
screen indicating that still playback is not
possible.
Notes on Discs
• To keep a disc clean, do not touch its
surface. Handle the disc by its edge.
• Keep your discs in their cases or disc
magazines when not in use. Also, do not
subject disc to heat/high temperature.
Avoid leaving them in a parked vehicle or
on a dashboard/rear tray.
• Do not attach labels, or use discs with
sticky ink/residue. Such discs may stop
spinning when used, causing a malfunc-
tion, or may ruin the disc.
• Do not use any discs with labels
or stickers attached. The following
malfunctions may result from using such
discs:
• Inability to eject a disc (due to a label
or sticker peeling off and jamming the
eject mechanism).
• Inability to read audio data correctly
(i.e., playback skipping, or no playback)
due to heat shrinking of a sticker or
label causing a disc to warp.
• Before playing, clean the discs with a
commercially available cleaning cloth.
Wipe each disc from the center out. Do
not use solvents such as benzene, thinner,
commercially available cleaners, or
antistatic spray intended for
analogue discs.
• Use only normal, round discs. If you insert
irregular, non-round, shaped discs they
may jam in the DVD player or not play
properly.
General Operating Instructions
EN
19
Publicidad
