Dmx Connection - Chauvet COLORADO 1VW TOUR Guía De Referencia Rápida

COLORado™ 1 VW Tour QRG

DMX Connection

Master/Slave
Connection
Mounting
Mounting
Diagram
Control Panel
Description
Password
ID Addressing
STD.2 Note
All manuals and user guides at all-guides.com
The COLORado™ 1 VW Tour uses a regular DMX data connection for its
DMX personalities: STD.1, STD.2, STD.W, STD.D, and UNO. See the
User Manual to connect and configure for DMX operation.
The COLORado™ 1 VW Tour uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Read the Safety Notes before installing this product.
Overhead Mounting
Button
<MENU> Exits from the current menu or function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases
<DOWN>
the numeric value when in a function
After being prompted, enter the following password by pressing:
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This password cannot be changed and must be used whenever prompted.
In this mode, the products with the same DMX starting address will
respond to the DMX controller based on the product's individual ID
address setting. For example, if ID address "0," is selected, all the products
with the same DMX address will respond in unison.
Deactivate ID addressing in each product when using STD.2 personality.
Safety Cable
Mounting Clamp
Double-bracketed
Yoke
Secure the safety cable using
the passageway on the back
of the product.
Function
3
EN
Floor Mounting