Publicidad
Set up trailer operation
OPTION 1
Encoding VW/Audi/Seat/Skoda with VCDS
Please note :
The procedure described below for encoding and enabling the trailer mode only serves for a general orientation and can
vary greatly depending on the model (motorisation / equipment). If necessary, fewer or further control units will have to be
adapted.
Encoding Gateway_19
Installations List ->
69 Trailer hitch control module -> installed
Encoding EZE_09 (electronic central electric
controller):
Access authorisation: 31347
Adaptation -10
Adaptation channel:
networking trailer connection device -> installed
Trailer hitch control module -> installed
Encoding DIS_13 (distance control)
Access authorisation 20103
Encoding
Control module for trailer -> installed
Encoding ZKS_46 (central module comfort system)
Trailer control unit
Encoding SWA_3C (lane change assistant)
Trailer control unit
Encoding SCH_17 (control panel insert)
Trailer control unit
Encoding RFK_6C (reversing camera system)
Trailer detection -> installed
Encoding STF_74 (chassis control)
Trailer -> installed
Encoding EPH_10 (PDC controller)
Trailer ->Trailer device
can be removed manually
Encoding FFF_A5 (front sensor system controller)
Trailer electronics -> installed
Encoding HDE-6D (boot lid electronics controller)
Controller for trailer -> installed
Important note on encoding and activating in trailer mode.
The aforementioned settings are carried out in the vehicle's electrical system and saved locally. During general updates for
the vehicle software (for example, within the scope of service or repair work), the settings may be overwritten and deleted
under certain circumstances. In this case, the trailer mode activation has to be updated again locally after the update.
39
/
87010997/11.07.2018
PF Jones Ltd, Nuttall street, Old Trafford, Manchester, M16 9JA, Tel- 0161 872 4755 email- info@pfjones.co.uk web- www.pfjones.co.uk
-> installed
-> installed
-> installed
17/20
Publicidad
