Removing The Unit - B52 marine BMC 1012 Manual Del Propietário

All manuals and user guides at all-guides.com
INSTALLATION
MONTAGEM FRONTAL DIN
1. Dashboard
2. Holder
After inserting the holder into the dashboard,
select the appropriate tab according to the
thickness of the dashboard material and
bend them inwards to secure the holder in
place.
3. Screw
1. Dashboard
2. Nut (5mm)
3. Spring washer
4. Screw (5x25mm)
5. Screw
6. Strap
Be sure to use the strap to secure the back
of the unit in place. The strap can be bent by
hand to the desired angle.
7. Plain washer

Removing the unit

1. Before removing the unit, press the OPEN
button to slide down the front panel.
2. Lever
Insert the levers supplied with the unit into
the grooves in the housing as shown in
figure until they click. Pulling the levers
makes it possible to remove the unit from the
dashboard.
4