LOCATION OF CONTROLS
1) DUST COVER
2) LCD DISPLAY
3) RECORD
BUTTON
4) SOURCE BUTTON
5) POWER LED INDICATOR
6) LEFT SPEAKER
7) POWER OFF/FUNCTIONS SELECTOR
8) 3.5 MM HEADPHONE JACK
9) USB SOCKET
10) RADIO BAND SELECTOR
11) SD/MMC CARD SLOT
12) FOLDER UP BUTTON
13) SKIP DOWN
BUTTON
14) PLAY/PAUSE/STOP
15) X-BASS ON/OFF BUTTON
16) REMOTE SENSOR
17) RIGHT SPEAKER
18) VOLUME UP/DOWN CONTROL KNOB
19) TUNING KNOB
20) FM STEREO LED INDICATOR
21) SKIP UP
BUTTON
22) LED DIAL POINTER
23) SPINDLE ADAPTOR
24) 33/45 RPM SPEED SELECTOR
25) PICK-UP HOLDER
26) LINE OUT SOCKET
27) FM WIRE ANTENNA
28) AUTO STOP ON/OFF SWITCH
29) AC POWER CORD
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.
PRECAUTIONS FOR USE
INSTALLATION
•
UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
•
DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE
ALL OTHER CONNECTIONS HAVE BEEN MADE.
•
DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
AROUND THE UNIT FOR VENTILATION.
CONNECTION
1.
CONNECT THE POWER CORD (29) TO AC OUTLET
2.
SWITCH THE FUNCTION SELECTOR (7) TO " PHONO OR USB/SD " FUNCTION. IF THE BACKLIGHT AT LCD
DISPLAY IS LIGHT UP. IT'S MEAN THE POWER SUPPLY IS NORMAL. NOW YOUR SYSTEM IS READY TO
PLAY THE MUSIC.
LISTENING TO RADIO
MANUAL TUNING
1. TURN FUNCTION SELECTOR (7) TO SELECT " TUNER " MODE.
2. SELECT THE DESIRED BAND BY RADIO BAND SELECTOR (10) (AM OR FM OR FM-STEREO).
3. TUNE TO THE REQUIRED STATION BY TURNING THE TUNING KNOB (19).
4. ADJUST VOLUME KNOB (18) TO THE DESIRE VOLUME LEVEL.
FM & FM-STEREO RECEPTION
SET THE RADIO BAND SELECTOR (10) AT " FM " POSITION. PROGRAMS ARE RECEIVED IN MONO MODE.
IN PARTICULAR WHEN STEREO SIGNAL ARE WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM IN
MONO.
BUTTON
E-1