Intended Use; Technical Specifications; Cleaning And Maintenance - Activejet ACTION MKR-550B Manual De Instrucciones

GB
Mini Air Cooler Activejet Regular MKR-550B
NOTE:
Before using the device, read the Instruction Manual. We recommend that you keep this manual for future reference.
When operating the device, it is advisable to follow the basic safety rules in order to avoid fire, electric shock and mechanical damage to the body.
Observing the instructions and recommendations contained in the Instruction Manual extends the device's service life.

INTENDED USE:

An air cooler is a device that works like a fan. A fan inside the device distributes a mist made from water in the tank. The cooler the water,
the lower the temperature of the air that comes out of the front of the device. It is permissible to put ice cubes into the tank in order to get the
lowest possible temperature. The air cooler additionally humidifies and purifies the air.
SAFETY RULES AND WARNINGS:
1. Do not attempt to repair the device yourself.
2. Keep the device work area in order.
3. Keep the device away from moisture and water, explosive and flammable substances and particles. Failure to follow these rules may result
in a fire or electric shock. Excessive dust on the device may lead to overheating of the motor and permanent damage to the device.
4. It is forbidden to use cables with non-original plugs or any adapters. Use the original power supply and cable included in the package.
5. Take care of the power cord: do not use the cord to move the device, pull it or disconnect it from the power supply. Protect the power cord
from heat, mechanical damage, and oil.
6. Do not put your fingers or any objects in the air outlet/inlet grille.
7. The device is not intended for people with limited physical, sensory or mental abilities. Children under the age of 8 and people
with restrictions may use the device only under the supervision of a person responsible for their safety.
8. Do not cover the device with e.g. clothing or other objects that could obstruct free airflow.
9. Do not flip the device upside down.
10. Do not immerse the unit in water or other liquids
11. Assembly, disassembly, cleaning, and maintenance of the device may only be carried out after unplugging the power cord.
12. Do not leave the switched on device unattended.
13. The device is intended for use indoors, in clean and dust free rooms. Large particles of dust and dirt can shorten the service life of the device.
14. Place the device on a hard, flat surface.
15. Do not move the device when the water tank is full.
16. If water penetrates the device, disconnect the power supply and leave it to dry for 24 hours.
17. Empty the water tank before any planned prolonged non-use. Switch on the highest fan speed for at least 4 hours. This will dry off and filter
the inside of the device.
18. Place the air cooler on an elevated surface, such as a table, desk or tabletop. This is the best way to cool down your personal space faster.
19. Before use, allow the filter to absorb water for at least 3 minutes after filling the tank.
20. Try to stay within less than one meter from the device. It will be most efficient if you sit directly in front of the front ventilation grille.
21. With the lowest fan speed, the air cooler will operate for about 8 hours after one filling of the tank. Even if the water tank is empty, the filter
will still be wet for some time and the air cooler will be cooling.

TECHNICAL SPECIFICATIONS:

Model: MKR-550B
Voltage and current: AC 100-240V
5V DC, 1.5–2.0 A
Weight: ~0.9 kg
FIRST USE:
1. Open the package and pull the device out.
2. Check if the device is complete and undamaged.
3. Place the device on a flat surface (fig. 1).
4. Fill the tank with approx. 550 ml (up to ¾ of height) of clean
water. We recommend using distilled water to guarantee
Fig. 1 Fig. 2
a longer service life. When filling the tank, the device must be disconnected from the power supply (fig. 2).
5. Plug the power supply into an outlet. Then insert the larger end of the USB cable into the power source and the smaller end into the power
port on the back of the device (fig. 3).
FEATURES:
1 fan speed indicator lamp
2 on/off button
3 back ventilation grille
4
water tank
5 USB power supply cable
6 light button
7 fan speed adjustment button
8 front ventilation grille
USE:
Make sure that the device is placed on a flat and level surface away from other
heat sources, at a sufficient distance from curtains and other lightweight materials.
The device is controlled by means of the buttons on the top control panel.
Fig. 4
1. Press the ON/OFF button to turn on the air cooler (fig. 4).
2. Set the fan speed using the fan speed adjustment button (fig. 5). You can choose out of 3 speeds: low, medium, and high. Fan speed indicator
lamps indicate the current setting.
3. Choose the light colour using the „light button" (fig. 6). You can choose between 6 colours and a rotation mode.
4. If the water level is too low, the tank light flashes 3 times and the signal repeats every 60 seconds until it is refilled.
Before switching off the device we recommend switching on the highest fan speed for 5 minutes in order to dry off the filter.

CLEANING AND MAINTENANCE:

When cleaning the device, the plug must be pulled out from the mains socket. The housing and individual components of the device should be
wiped using a clean, soft cloth with neutral detergents and warm water.
We recommend cleaning the water tank once a week.
For optimal operation of the air cooler, we recommend replacing the filter every 6 months.
Fig. 3
Mini Air Cooler Activejet Regular MKR-550B
2
1
8
7
6
Fig. 5 Fig. 6
GB
3
4
5