Storage - Raven GEN 4000 Manual Del Propietário

STORAGE

WARNING
In order to avoid burns or fire due to contact with any hot part of the
generator, avoid packing or storing the generator before it has cooled.
If storing for a long period of time, ensure the storage area is clean and
dry.
1. Drain the fuel from the fuel tank, clean the strainer, O-ring and
sediment, then securely replace. Drain the fuel out of the carburetor
by loosening the drain bolt, then refit and tighten the carburetor
bolt.
WARNING
Gasoline is extremely flammable and is explosive under certain
conditions. Drain fuel in a well-ventilated area with the engine stopped.
and cool Never smoke or allow flames or sparks in the area during this
procedure.
2. Unscrew the oil dipstick and drain bolt from the crankcase to
completely drain the oil. Replace the drain bolt and add fresh oil to
the upper mark. Securely replace the dipstick.
3. Remove the spark plug, and pour about a tablespoon of clean
engine oil into the cylinder. Crank the engine several revolutions
to distribute the oil, and then reinstall the spark plug.
4. Slowly pull the starter grip until resistance is felt. Leave the
intake and exhaust valves in the "closed" position.
5. Place the generator in a clean area.
DRAIN
29