Before First Use; Operating Instructions - Bella 14038 Manual De Instrucciones

Before First Use

1. Carefully unpack the Sport Rocket Blending Set and remove all
packaging materials. Check the contents to ensure that all parts and
accessories are present, and have been received in good condition.
2. Handle the blending blade attachment by its collars only.
WARNING: Do not touch blades. Blade attachments are very sharp.
Use extreme care when handling. Failure to do so can result in personal
injury.
3. Wash all lids in warm, soapy water. Rinse and dry thoroughly.
4. Clean each cup before first use. Fill cup one-quarter full with clean,
warm water. Following the steps outlined in the Operating Instructions,
pulse several times using the blending blade Rinse thoroughly.
5. The motor base may be wiped with a damp cloth.
WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER.

Operating Instructions

1. Place the motor base on a flat, clean, dry countertop or table.
2. Make sure the unit is unplugged.
3. The Sport Rocket Blender comes
with 1 blending cup. Place the
food to be processed into cup.
4. To assemble for blending using
the blade's collar to handle,
place the blending blade into the
blending cup.
IMPORTANT: Check to make
sure the travel lid is not attached
to the blending cup before
assembling the blade. If it is,
simply remove it.
IMPORTANT: In the base of the
blade's collar, there is a plastic
gasket seal that creates an
airtight fit with the Sport Rocket
blending cup. After dishwashing
and before each use, always
check to make sure the gasket
is properly in place, as the heat from some dishwashers may cause the
gasket to become loose. WARNING: Never operate the Sport Rocket
Blender when the processing cup is empty. WARNING: Never overfill the
processing cup. Do not exceed the MAX line.
5. Hold the cup firmly in one hand. Use the other hand
to tighten the up/blade assembly by turning the blade collar clockwise
until snug.
All manuals and user guides at all-guides.com
6
Figure 2