Prestige APS-OE2B Guía De Programación

All manuals and user guides at all-guides.com
TRANSMITTER PROGRAMMING GUIDE
The transmitters included with the system have been pre-programmed
at the factory, with each button pre-assigned to control a specific
function of the system. Although the system in the vehicle has either
a 2 or 3 channel receiver, depending on the model, the transmitters
included with the system are capable of transmitting 3 distinct signals.
This allows you to program each transmitter to more than one vehicle
in two car families, and also allows you to change which button(s)
control certain functions of the system.
( Example: Transmitter channel 3 can be programmed to activate
Receiver channel 2. ) Refer to the chart below for access to each of the
transmitter channels, and for the standard factory button assignments.
TRANSMITTER
CHANNEL BUTTONS CHANNEL
1 ARM
DISARM
2 OPTION
3 ARM
DISARM
& OPTION
Some of the more common accessories for these additional channels
are;
*AS 9154 Remote Garage Door Interface
*AS 9075 Remote car starter
*AS 9153 Remote window roll up
*AS 9256 Remote trunk release relay
** Only Available With Some Systems
Released 9-24-99
Rev A: References to the APS-33, 3-6-02.
Model : APS-OE2B
SYSTEM RECEIVER
FUNCTION
1 Remote Arm/Disarm
& or **Remote Lock/Unlock
**Remote Emergency Panic
2 * Pulsed Output for Accessories
3 * Switched Output for Accessories
* Second Vehicle Control
128-5544A
1 OF 4