CMT ORANGE TOOLS DAF-001 Manual De Instrucciones

DIGITAL
ANGLE
FINDER
1.
BUTTONS AND LCD DISPLAY
A. ABS mode.
B. Press longer than eight seconds to turn your device off;
ON
OF F
HOLD
C. Records the last measured value.
Z E RO
B C D
D. Switch between absolute and relative measuring mode
ABS
E. High resolution: 0.05°
F. Analogue quadrant showing.
2. MEASURING IN ABSOLUTE (ABS) MODE
Place the moving blade in the same
position of the fixing blade.
3. USING A HIGH QUALITY LEVEL VIAL
Standard level surface.
4.
ANALOGUE QUADRANT FOR MOVING BLADE
-45°
45°
0°
90°
5. LOCKING YOUR DIGITAL ANGLE FINDER FOR MEASURING
Make different measuring by locking at four different locking holes.
Measuring range: -45° ~180°
Measuring range: -180° ~45°
Notice:
measuring range can reach 360° after screwing off the locking knob.
WARNING: Cancer and Reproductive Harm -
21
PAP
DAF-001
short press to turn LCD off.
by short pressing the button.
Under ABS mode
Under ABS mode,
press ZERO/ABS
(1) Device automatically
for five seconds
to set the moving resets to the original zero
blade to zero.
position after shutting off.
(2) Device even makes
upright measurements.
-0.05°
45.05°
0.05°
- Position in the quadrant: 45°.
- Display range of quadrant is 360°.
Measuring range: 0° ~225°
Measuring range: -225° ~0°
www.P65Warnings.ca.gov
DIGITAL
ANGLE
FINDER
Plumb surface
for measuring.
DAF-001
1. Metal moving blade
on the front.
2. Aluminium fixing blade.
3. LCD display.
4. Locking knob.
High Resolution Power
3V CR2032
lithiun battery
Holes for locking.
Analogue quadrant
showing.
Four holes for locking when measuring
specific angles. Measuring range can reach 360°
after screwing off the locking knob.
Lock the moving blade
at any angle, make precise
drawings and cut directly.
Clean digital angle finder with mild
liquid soap and a damp cloth.
Never dip into water.
Don't mark bar with any electric
engraver or scratch it.
BATTERY
INCLUDED
(CR2032-3V)
INSTRUCTION
EN ES FR IT DE PL RU
Imported by
www.cmtorangetools.com