Screen Brightness - PNI Fish Seeker US600 Manual De Usuario

underwater contour generated based on the feedback transmitted
by the sonar signal. The darker the color, the higher the density, the
harder the bottom; the lighter the color, the lower the density and
the softer the bottom.
Functions
Turn On / Off
Press the power key to turn on the device. The logo appears on the
screen, then the device enters normal operation mode.
Press the power key to turn off the device.
Note: when in the menu, if you do not perform any operation for 5
seconds, the screen returns to the main display interface.
Switch between normal operating mode and demo mode
The sonar receiver comes from the factory preset to the normal operation
mode. Press the MENU key to switch to Demo mode. Press ENTER to
confirm the setting.
Do the same to return to normal operation.

Screen brightness

9 brightness levels are available. Level 1 is the darkest and level 9 is the
brightest.
Unit
Choose the unit for depth and temperature.
Alarm
Depth alarm. When the water depth is less than the set value, the device
7 User manual