Bluetooth Mode - EDIFIER S1000W Manual

Audio Inputs
3. Coaxial mode
• Press the "Volume/Input" button on the active speaker, or press the "COAX" button on the remote control to switch to
coaxial mode (the red indicator will blink twice and then will be steady lit);
• Connect audio source to the "COAX" input port on the rear panel of the active speaker using coaxial cable (coaxial cable
not included);
• Play music on the connected device and adjust the settings to a desired level.

4. Bluetooth mode

• It is Bluetooth mode by default when the product is turned on for the first time; You can also press the "Volume/Input" button
on the active speaker, or press the " " button on the remote control to switch to Bluetooth mode (the blue indicator will blink
rapidly);
• Select "EDIFIER S1000W" in your device setting to connect, after pairing is successful, the blue indicator will be steady lit.
• Play music on the connected device and adjust the settings to a desired level.
Note:
• To enjoy all Bluetooth functions of this product, please ensure your audio source device has A2DP (Advanced Audio
Distribution Profile) and AVRCP(Audio Video Remote Control Profile) profiles.
• Bluetooth connectivity and compatibility may differ amongst different source devices, depending on the software versions
of source devices.
• Only the standard PCM audio signals (44.1KHz/48KHz/96KHz/192KHz) function in optical/coaxial mode.