Bluetooth Pairing - Oppo Enco Guia De Inicio Rapido

English

Bluetooth pairing

1. If you are using your OPPO Enco Air earbuds for the first time, open the
charging case with your earbuds inside. The earbuds will automatically enter
pairing mode.
2.
Turn on Bluetooth on your phone:
• Pairing for the first time: Open the charging case with your earbuds inside,
and your earbuds will automatically enter pairing mode. You can begin
pairing your phone or any other device by going to the device's Bluetooth
setup page and finding "OPPO Enco Air".
• Quick pairing: Hold your OPPO Enco Air earbuds near an OPPO phone that
has Bluetooth turned on. A popup will appear on your phone. Complete
pairing according to the onscreen instructions.
※ Note: Only some OPPO phone models support quick pairing. For details, visit www.oppo.com.
Auto reconnection
When you open the charging case with your OPPO Enco Air earbuds inside, your
earbuds will automatically reconnect to the most recently connected device.
If they cannot find or fail to connect to the most recently connected device, they
will enter pairing mode which will allow them to be connected to another device.
Pairing with other devices
Automatically enter pairing mode: If your OPPO Enco Air earbuds have automatically
reconnected to the last connected device, disconnect the Bluetooth on that device
first, and your earbuds will automatically enter Bluetooth pairing mode. You can
now pair your earbuds with a new device on the device's Bluetooth setup page.
Manually enter pairing mode: Wear your earbuds and touch and hold the
control areas on both earbuds for 4 seconds. Your earbuds are ready to be paired
after you hear 4 beeps. You can now pair your earbuds with a new device on
the device's Bluetooth setup page.
2
Bluetooth
OPPO Enco Air