Publicidad
Idiomas disponibles
Idiomas disponibles
PARTS IDENTIFICATION
6-------,---
1.
Handle
2. Contrai panel
3. Air outlet
4. Front grille
5. Water level indicator
6. Casters
7.
Dust filter
8. Water curtain
9. Water tank caver
1 O. Water tank
11 . Remote contrai
REMOTE CONTROL
<!)
..
.
3
�
0
Al M
5
�
&e
1. Speed button.
2. ON/ OFF button.
3. COOL button.
4. Timer button.
5. Automatic mode button.
6. OSC button.
7.
Mode button.
8. ANION button.
"'
S.
,0
0
.,
Al M &;.:,
11
4
6
7
8
- 9 -
CONTROL PANEL
5
(\;
3
4
1. ON/ OFF button.
2. Lights.
3. Speed button.
4. Timer button.
5.
Power button.
6. COOL button.
7. Automatic mode button.
8. OSC button.
9. ANION button.
UNIT ASSEMBLY
Place the castors into the back and front hales at air
cooler base and secure them.
Slightly press and slide out the remote-control battery
caver. Then insert a CR2023 battery with the correct
polarity and place the lid back in place .
l
NOTE: If the unit has not been used for a long period
of time, remove the battery from the remote contrai to
avoid battery liquid leakage.
OPERATING INSTRUCTIONS
1
Set the air cooler on a dry, level surface.
2.
Before connecting the appliance, make sure that the
power supply of your appliance corresponds exactly
to the voltage of your electrical installation.
Before turning on the air cooler, you must fill the
3.
tank with water. Remove the water tank from the air
cooler and fill the tank with cold tap water to ensure
that it does not exceed the maximum line mark on
the tank. Always fill at least to the minimum level. If
necessary, place ice cubes on the larger side of the
water tank for better cooling.
2
"
� �
8
9
8
C <>
� 2
�
_____,,.
Publicidad
