Publicidad
Idiomas disponibles
Idiomas disponibles
Flying parts from the saw chain (cutting hazard / injury from flying chips)
o
Flying parts from the object being sawed.
o
Breathing in particles from the object being sawed.
o
Skin contact with the saw chain lubricant.
o
Hearing loss from failure to wear ear protection while working.
o
Safety datasheet
Your chainsaw has been developed and produced with the highest levels of reliability, user-convenience and user safety. It maintained carefully, the device will work reliably and fault-free for
many years.
6
GENERAL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
Work area safety
•
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
•
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
•
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
•
Do not use the device in bad weather if there is any risk of a lightning strike.
Electrical safety
·
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
·
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
·
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
·
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
·
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
·
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock
·
NOTE The term "residual current device (RCD)" may be replaced by the term "ground fault circuit interrupter (GFCI)" or "earth leakage circuit breaker (ELCB)".
Personal safety
·
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
·
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
·
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
·
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
·
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
·
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
·
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce
dust-related hazards.
Careful handling and use of power tools
·
Do not overload the tool. Use the right power tool for your task. You can work better and more safely within the specified performance range with the right power tool.
·
Do not use a power tool with a defective switch. A power tool which can no longer be switched on or off is dangerous and must be repaired.
·
Remove the battery before adjusting settings, replacing accessories or after use. The safety provisions prevent the power tool from starting accidentally.
·
Store all unused power tools out of the reach of children. Do not let persons use the device who are unfamiliar with it or who have not read these instructions. Power
tools are dangerous if they are used by inexperienced persons.
·
Carefully maintain your device. Check that the moving parts work correctly. Make sure that no part of the device is damaged. Check the assembly and all other
elements that could affect the operation of the device. If parts are damaged, you must have your device repaired before use. Many accidents are caused by poorly
maintained power tools.
·
Keep cutting tools sharp and clean. Carefully maintained cutting tools with sharp cutting edges get stuck less often and are easier to use.
·
Use power tools, accessories, tool bits, etc. according to their instructions. Consider the working conditions and work to be performed. The use of power tools for
purposes other than the intended uses can lead to dangerous situations.
Publicidad
