Publicidad
10
Congratulations! The physical configuration of the RaPTr system is complete.
The scanner component launches automatically on the scanner PC once the power supply
is plugged in.
By default the scanner component is configured for 8x8 Min and 24x24 Max module
size 2D barcodes. This configuration will allow you to read the example barcodes included
with the system. These and other settings are configurable from within the software
directly.
The RapTr Server server software runs as a service on the server PC, and runs
automatically on PC boot. The RapTr Server Utility software allows one to configure the
service as needed.
By default the server component is configured to read a CSV file at the default file system
location of
"C:Artemis/Files", and an example CSV file is included on the Desktop of the server.
For more in-depth options and discussion of the software please refer to the RaPTr Set-up
Guide and the RaPT Interfaces and Architectures documents, available on the desktop of
the server, and on the Artemis Vision website here:
https://www.artemisvision.com/logistics-solutions/barcode-scanning/
RaPTr Evaluation Unit Assembly Guide - 2c | 7
ARTEMIS VISION
Publicidad
