Oil Change - GENERGY Natura 5500 Instrucciones De Uso

8.1 Oil change.

1 Keep the engine running for 5 or 10 minutes, so that the oil can reach some
temperature and decrease its viscosity (more liquid). In this way, it will be
easier to extract it completely.
2 Under the oil drain hole, place a suitable container to collect the used oil.
3 Unscrew the oil drain screw by turning it counterclockwise. Save the screw
and its gasket.
4 Remove the cap with the oil level, so that the engine receives air and expels
the oil faster.
5 Turn the engine by pulling the starter rope smoothly. Thus, the oil housed in
the moving parts of the engine can be extracted.
6 Once all the engine oil has been extracted, put back the drain screw with its
gasket. In case of spillages, clean.
76