Product Description And Specifications; Product Features; Technical Data; Noise/Vibration Information - Bosch GSH 7 VC Professional Manual Original

The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for chiselling work in concrete,
brick, stone and asphalt, as well as for driving in and com-
pressing with the appropriate accessories.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Dust protection cap
(2) Locking sleeve
(3) Chisel adjustment switch (Vario-Lock)
(4) Vibration damping
(5) Handle (insulated gripping surface)
(6) On/off switch
(7) Lock-on button for on/off switch
(8) Service indicator
(9) Thumbwheel for impact rate preselection
(10) Auxiliary handle (insulated gripping surface)
(11) Knurled nut

Technical Data

Demolition hammer
Article number
Rated power input
Impact rate
Impact energy per stroke
according to EPTA-Proced-
ure 05:2016
Tool holder
Weight according to EPTA-
Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Bosch Power Tools

Noise/Vibration Information

Noise emission values determined according to
EN IEC 62841-2-6.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 91 dB(A); sound power level
102 dB(A). Uncertainty K=2 dB.
Wear hearing protection
Vibration total values a
determined according to
EN IEC 62841-2-6:
Chiselling: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u
Auxiliary handle (see figure A)
u
GSH 7 VC
You can swivel the auxiliary handle (10) to any angle for a
3 611 C22 0..
safe work posture that minimises fatigue.
– Loosen the knurled nut (11), rotate the auxiliary handle
W 1500
-1
min 1370–2720
J 13
Changing the Tool
With the SDS-max tool holder, you can change the applica-
SDS max
tion tool simply and easily without additional aids.
kg 8.3
The dust protection cap (1) largely prevents the penetration
of drilling dust into the tool holder during operation. When
inserting the tool, make sure that the dust protection cap (1)
/ II
does not become damaged.
(triax vector sum) and uncertainty K
h
2
= 10.9 m/s , K = 1.5 m/s
h
Pull the plug out of the socket before carrying out any
work on the power tool.
Do not operate your power tool without the auxiliary
handle (10).
(10) around the axis of the tool to the required position
and retighten the knurled nut (11).
1 609 92A 748 | (07.03.2022)
English | 11
2