Sebson AC OUT TIMER A1 Manual Del Usuario página 6

▪
This product is suited for indoor- and outdoor-use.
▪
Protect the product from external damage, heavy dirt, moisture and excessive heat!
▪
In order that the warranty claim does not expire please use only the supplied items. Repairs may only be
done by an expert and only by using original spare parts!
▪
In commercial institutions, the accident prevention regulations of the professional trade association for
electrical equipment and facilities must be adhered to.
Start up (Fig.2):
Danger:
Do not close several switches consecutively! Danger of overheating!
Attention:
Take the product out of the socket if you do not use the product for an extended period of time!
▪
Please observe the safety instructions and technical data before installing this product!
▪
Operate this product at a suitable power outlet (230V AC 50Hz).
Setting the current time (Fig.3):
Turn the inner ring with the dip switches clockwise until the black arrow corresponds to the current time. One hour is
divided into 4 time intervals consisting of 4 dip switches each. 1 dip switch corresponds to 15 minutes.
Set time periods (Fig.4):
To set a time interval, push in the dip switches with the help of a screwdriver. When the set start or end time is
reached, the unit switches on or off again with a soft clicking sound.
Technical Data:
Operating voltage:
Maximum load:
Electrical protection:
Protection class:
Information for private households (WEEE):
The Electrical and Electronic Equipment Act (WEEE) contains a large number of requirements for the handling of
electrical and electronic equipment. The most important ones are summarised here.
1. Separate collection of waste equipment
Old, worn-out or defective electrical and electronic equipment is referred to as waste equipment. These devices must
not be disposed of in the normal household waste or together with the residual waste. The devices should be
transferred to special collection and return systems.
2. Batteries and rechargeable batteries as well as illuminants
As a rule, owners of WEEE shall separate spent batteries and accumulators that are not enclosed in the WEEE, as
well as light sources that can be removed from the WEEE without causing damage, from the WEEE before handing
it over to a collection point. This does not apply if WEEE is prepared for reuse with the participation of a public waste
management authority.
Batteries or rechargeable batteries that contain harmful substances are marked with the symbol of a crossed-out
dustbin and must not be disposed of in household waste. Below the dustbin symbol is the chemical name of the
pollutant - in the example below "Cd" for cadmium. "Pb" stands for lead, "Hg" for mercury:
If disposed of improperly, the substances contained in the batteries may cause hazards to health and the environment.
The hazards are averted by the separate collection and proper disposal of used batteries.
230V AC 50Hz
Max. 3.600W/ 16 (2)A
IP44
III
6