Beurer AS 50 Manual De Instrucciones página 42

Why does nothing happen when you press the buttons?
Check the state of the battery. If the battery is dead, then no display is
possible. Insert a new battery (see chapter "6.1 Insert battery/Change
battery").
Why is nothing shown on the display?
Check the state of the battery!
If the battery is dead, then no display is possible. Insert a new battery
(see chapter "6.1 Insert battery/Change battery").
Check whether the battery has been inserted properly!
If not, insert the battery again (see chapter "6.1 Insert battery/Change
battery").
Please note: If the contact is incorrect, the device can be damaged
and it can possibly no longer work.
Why are my steps not recorded correctly?
Set the sensitivity of the device to your personal step sequence (see
chapter "8 Recording the activity", section "Set the sensitivity").
Check the state of the battery. If the battery is dead, then the device
cannot measure correctly. Insert a new battery (see chapter "6.1 Insert
battery/Change battery").
Why can't I download my data from the activity sensor?
Check cable attachment to the mini-USB. If the cable is not inserted
properly, then no connection can be made.
Can I use the activity sensor for bicycling as well?
The activity sensor is capable of counting pedalling movements when
bicycling, provided it is worn in an appropriate position (best: on leg or in
a tightly closing or side pocket of your pants. Not recommended: on the
belt). However, the movements counted are not equivalent to steps
walked. Continuous pedalling is mostly added to the "normal walking
activity time. NOTE: Please attach the activity sensor securely otherwise
it might get lost.
All manuals and user guides at all-guides.com
40
"