Publicidad
Idiomas disponibles
Idiomas disponibles
Trouble
•
Heater
☛ The thermostat automatically
cycles ON
and OFF
frequently.
☛ Every 10-15 minute the
•
Heater is
☛ When the heater is in
Blowing
Cold Air.
☛ Unit is in the Fan Only
☛ Power Button may have
•
Fan Speed
☛ Max Heat and Low Heat
Doesn't
Change.
•
Unexpected
☛ You may hear a popping or
Noise.
•
Unexpected
☛ There may be an odor or
Smell.
BCH9210-LA_10MLM1.indd 7
BCH9210-LA_10MLM1.indd 7
All manuals and user guides at all-guides.com
Troubleshooting for your Heater
Probable Cause
turns the heater on and off
to maintain selected comfort
level.
heater turns on and runs for
a minute.
Thermostat Mode and
reaches the set temperature
it will automatically perform
a 15 second cool down
(blowing cold air) to ensure
thermostat accuracy.
setting.
been pressed to turn off the
heater.
settings control the heat
output of the heater and not
the fan speed. Fan runs at
the same speed on all
settings.
crackling sound as the
heater heats up. This is
normal and safe operation.
Once the heater heats up,
the crackling sound will go
away.
vapor coming from the
heater the first time you use
it or after prolonged or
seasonal storage.
Solution
✔ To make this occur less frequently turn
the Dial Wheel right to the highest setting.
✔ This is normal operation to ensure the
heater is maintaining the room temp
accurately.
✔ Raise the temperature higher or change
setting to Low (1) or Max Heat (2).
✔ Press the Max Heat (2) or Low Heat (1)
Buttons.
✔ Press the Power Button to turn on the
heater.
✔ Run heater in Max Heat (2) for maximum
heat output.
✔ If the noise persists, please contact an
Authorized Service Center.
✔ This is normal and is the result of dust or
other debris accumulating on the heating
element. Make sure the heater is in a well
ventilated area and continue running until
the odor or vapor goes away.
7
6/24/10 8:17 AM
6/24/10 8:17 AM
Publicidad
