Basic Function; Using The Radio - Premier SX-2124C Manual De Instrucciones

BASIC FUNCTION

SWITCHING ON THE UNIT
Set the FUNCTION switch to CD/AUX/MP3-IN or TUNER.
TO ADJUST VOLUME
Rotate the VOLUME CONTROL back and forth to increase and decrease volume.
BASS BOOST SYSTEM
For more extra bass, press the BASS BOOST button. Press again to turn off bass.
AUX/MP3-IN OPERATION
This unit has provided special AUX/MP3-IN jack, through this jack other audio sources can be
connected to this unit and be amplified.
1. Set the FUNCTION switch to CD/AUX/MP3-IN position.
2. Connect the audio cable into the AUX/MP3-IN jack and the other end connect to the AUDIO OUT
jack of the external audio source. The unit will change to AUX mode automatically.
3. Adjust the volume of the main unit to your desired level.
Press PLAY of the external audio source (eg. MP3 player) to start playback.

USING THE RADIO

TUNING IN RADIO STATIONS
1. Move the FUNCTION switch to TUNER position, the POWER indicator will illuminate.
2. Slide the BAND switch to select the desired wave band: AM/FM.ST..
3. Tune to required station by rotating the TUNING KNOB.
4. Rotate the VOLUME CONTROL to comfortable volume level.
5. Extend the TELESCOPIC ANTENNA to its full length if you are listening to FM broadcasting. Gently
rock the unit back and forth to get the best reception when you are listening to AM program, or place
the unit in an open place.
Note: The FM STEREO indicator will be on if you are receiving FM stereo program.
6. Turn off the radio by switching the FUNCTION switch to "OFF" position.
LISTENING TO COMPACT DISC
Set the FUNCTION SWITCH to "CD/AUX/MP3-IN" position. Press the CD door PUSH TO OPEN to
open the CD door to put in a compact disc. Close it and start reading. The LED display always shows
the tracks of a disc which are still to be played.
Playing The Entire Disc
1. Playback will start by pressing CD PLAY/PAUSE button, playback starts with the first track. The
display will show the current track number.
2. To interrupt playback, press CD PLAY/PAUSE button.
3. To resume playback, press CD PLAY/PAUSE button once again.
4. To stop playback, press CD STOP button.
Selecting A Different Track During Play
1. Press CD SKIP SEARCH FORWARD/BACKWARD button on the unit continuously until the desired
track number appears in the display.
2. Playback starts from the desired track. (Press CD PLAY/PAUSE button to start playback in stop
mode).
P-4
All manuals and user guides at all-guides.com
5