Before Startup - Kärcher K 4.640 Manual Del Usuario

Operation
Scope of delivery
The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness
when unpacking.
In the event of missing accessories or any
transport damage, please contact your
dealer.
Description of the Appliance
Illustrations on Page 2
1 Coupling element for water connection
2 High pressure hose
3 Quick coupling for high pressure hose
4 Water connection with integrated sieve
5 Appliance switch "0/OFF"/ „I/ON"
6 Dosage regulator for detergent
7 Storage for trigger gun
8 Storage of detergent reservoir with de-
tergent connection
9 Transport handle
10 Storage for high-pressure hose
11 Storage hook for mains connection ca-
ble
12 Storage for accessories
13 Detergent reservoir with locking lid
14 Wheels
15 Trigger gun
16 Lock trigger gun
17 Key to detach the high-pressure hose
from the trigger gun
18 Spray lance with pressure regulation
(Vario Power)
19 Spray lance with Dirtblaster
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.
All manuals and user guides at all-guides.com
Mount loose parts delivered with appliance
prior to start-up.
Install wheels
 Illustration
Install the storage for hand-spray gun
 Illustration
Install the transport handle
You will need the 2 included screws as well
as a Philips screwdriver PH 2.
 Illustration
Install the dosage regulator for detergent
You will need the 2 included screws as well
as a Philips screwdriver PH 2.
 Illustration
Connect the high pressure hose to the
hand spray gun
 Illustration
- 4
EN

Before Startup

Push the wheels into the intake and se-
cure with the enclosed plugs, watch for
positioning of plug.
Place the bottom holder into the recess-
es and push forward until it audibly
locks in.
Insert the top holder and push down all
the way.
Slide the transport handle into the guide
and secure it with 2 screws.
Insert both detergent hoses onto the
hose fittings.
Install the dosage regulator and con-
nect using 2 screws.
Note: During installation you must
make sure that the tongues of the dos-
age regulator match up with the intend-
ed recesses in the casing.
Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nipple
is aligned correctly.
Check the secure connection by pulling
on the high pressure hose.
15