Chapter 4 - Bios Setup; About Bios Setup; When To Use Bios Setup; How To Run Bios Setup - Tulpar A Serie Manual De Usuario

EN
CHAPTER 4
Bios Setup

4.1 About Bios Setup

4.1.1 When To Use Bios Setup?

You may need to run the BIOS Setup when:
An error message appears on the screen during the system booting up and is
•
requested to run SETUP.
• You want to change the default settings for customized features.
You want to reload the default BIOS settings.
•

4.1.2 How to Run BIOS Setup ?

To run the BIOS Setup Utility, turn on the notebook and press the [Del] key during
the POST procedure.
If the message disappears before you respond and you still wish to enter Setup,
either restart the system by turning it OFF and ON, or simultaneously pressing
[Ctrl]+[Alt]+[Del] keys to restart.
Be noted that the screen snaps and setting options in this chapter are for your references
only.The actual setting screens and options on your Notebook may be different because of
BIOS update.
The setup function only can be invoked by pressing [Del] or [F2] key during POST that provide
a approach to change some setting and configuration the user prefer, and the changed values
will save in the NVRAM and will take effect after the system rebooted. The setup uses a menu
interface to allow the user to configure their system and the features are briefly listed as
follow.
Press [F7] key for Boot Menu.
The drivers, BIOS and utilities bundled in the support DVD may vary by models and are subject
NOTE
to change without notice.
20