Using The Cuff; Taking A Measurement - CVS Health BP3MY1-2ECVS Manual De Instrucciones

5.3. Using the cuff

All manuals and user guides at all-guides.com
a) Remove all objects and jewelry (e.g., wrist-
watch) from the wrist in use. This is nor-
mally the left wrist. Put the cuff over the
wrist with the monitor face on the inside
of the wrist.
b) The distance between the cuff and the
hand should be approx. 10 mm (1/2").
c) Secure the cuff with the hook and loop fas-
tener so that it lies comfortably and not
too tight.
d) Support the arm with a small cushion so
that the cuff rests at about the same height
as the heart.

5.4. Taking a measurement

After the cuff has been appropriately posi-
tioned the measurement can begin:
Remain still during your measurement, do
not flex muscles.
a) Remain seated quietly for 5 minutes before you
begin the measurement.
b) Press the POWER button to begin. After
pressing the POWER button the pump
begins to inflate the cuff. On the display, the
increasing cuff pressure is continually
shown.
c) After reaching the proper inflation pres-
sure, the pump stops and the pressure
slowly falls. The cuff pressure is displayed
during the measurement.
16
0.5 - 1.0 cm
(¼" - ½")
1
Pulse Detected -
Unit measuring