Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH Operating instructions
1.2.
Conventions
In this manual we have adopted the following conventions:
Notes: The notes include informations which
deserve to be put in evidence with respect to
the text.
Notices: the warning messages appear before
some prodedure and, if they are not correctly
observed or followed, they may cause some
damage to the machine.
Attention: the attention messages appear before
some procedures and, if they are not correctly
observed or followed, they may cause some
physical damages to the operator.
1.3.
Foreword
In drafting this manual, we have taken into consideration
all operations referring to a normal and regular use of the
electrocompressor.
For a correct and optimal use of the electrocompressor, it
is necessary to read and strictly follow all the instructions
therein written.
We suggest to keep this manual always in a good state, in
an easily accessible place near the electrocompressor.
The use of the machine must be allowed only to skilled
and experienced people. We suggest not to make repairs
or interventions, if they are not mentioned in the manual.
All repairs requiring the disassembly of some parts of the
electrocompressor must be passed to authorised
technicians. In order to ensure the efficiency as well as
the duration of the electrocompressor, we suggext to use
only original spare parts.
1.4.
Warranty
The electrocompressor is guaranteed for a period of 12
months starting from the purchasing invoice date.
This warranty only covers the free replacement of the parts
found defective with the exception of wearing and electric
parts.
A bad use of the compressor as well as its modification
automatically exclude the warranty.
All transport costs and manpower costs are also excluded
from this warranty. Should the electrocompressor be
returned, even if under warranty, it must be shipped free
of charge.
The warranty is not vadid if it is without purchasing
date and if the reseller's stamp has not been put
by the reseller on the last page of this manual.
1.5.
Identification of the machine
The electrocompressor is identified through a label
attached on the side of the motor-holding plate (fig. 1).
1.6.
Phone/fax/mail contacts
For any written or spoken contact with the reseller or with
GIS S.n.c., it is necessary to give all the following
information to enable a precise identification of the
compressor and of its problem:
1 type and model of the compressor (it can be read on
the plate of fig. 1);
2 searial number (it can be read on the plate of fig. 1);
3 voltage and frequency of the electrocompressor (it can
be read on the plate of fig. 1);
4 name of the reseller where the electrocompressor was
bought (see stamp on last page);
5 date of purchase;
6 description of the defect;
7 working hours per day;
Send to:
GIS S.n.c.
Via Dei Barrocciai, 29
41012 CARPI (MO) Italy
1.7.
Certification
As to CE-conformity declaration, please refer to the last
page.
2.
DESCRIPTION OF THE MACHINE AND SPECIFICATIONS
The electrocompressor is essentially made up by a steel
tank of a proportionate thickness, by an electric motor with
a pulley connected to a pump with flywheel, by means of
a belt transmission.
The motor drives the pump which compresses the air
and sends it to the tank. all this is controlled by a pressure
switch whose function is to maintain the pressure inside
the tank between some minimal and maximal values by
stopping and starting automatically the elecric motor. The
electrical and pneumatic installation have been
manufactured with certified materials assembled as stated
by the regulations on subject. The machine is also provided
with electrical, pneumatical and structural protections to
guarantee the operator's safety.
21
Publicidad
