weight of all loads. This cycle can be
repeated until the maximum load is
reached.
Error Codes
•
'Err': The scales are overloaded, and the
maximum weight has been exceeded.
Remove object(s) from the scale to avoid
damaging the sensor.
•
'----': The measuring is not stable,
please wait for a moment.
•
'Lo': Batteries are low and need
replacing.
Switching Off
•
Auto switch-off: If no operation is made
in two minutes, the scale will switch off
automatically.
•
Manual switch-off: Long press
turn off the scale manually to maximise
battery life.
CLEANING & STORAGE
― ―
WARNING: ALWAYS TURN THE
PRODUCT OFF AND REMOVE THE
BATTERIES PRIOR TO CLEANING AND
STORAGE.
CAUTION: DO NOT ALLOW WATER
OR OTHER LIQUIDS TO RUN INTO
THE INTERIOR OF THE PRODUCT, AS
THIS COULD CREATE AN ELECTRICAL
HAZARD.
CAUTION: DO NOT USE ANY
ABRASIVE CLEANERS OR SOLVENTS, AS
THIS WILL DAMAGE THE PRODUCT.
•
Clean the scale surface by wiping it with
a soft, damp cloth. Dry the surface of
the scale with a soft clean cloth.
•
Store the product in a safe, clean and
dry place, out of reach of children when
not in use.
RECYCLING & DISPOSAL
― ―
The packaging of your new product has a
recycle mark on it. Please dispose of it as
recycled paper. Waste electrical products
should not be disposed of with general
household waste. This is to prevent the
possible harm to the environment and human
well-being. Contact your local council or
government for information regarding the
collection schemes in your area.
to
English | 4