OPERATION
Releasing the child lock function
Turn on the appliance using the on/off sensor field (1); all displays will show the letter „L" (Locked).
To release the Child Lock function simultaneously touch the right cooking zone selection sensor
field (5) and „-" sensor field (4) and once again touch the „-" sensor field (4). The appliance will
switch itself off (all displays are off).
The Child Lock function must be released within 10 seconds and no sensors fields
other than those described above must be touched. Otherwise the Child Lock
function will not be released.
If the Child Lock function has been released successfully, „0" and a flashing dot
will be shown on all displays once the appliance is switched on using the on/off
sensor field (1). If cooking zones are still hot, the display will alternate between
showing „0" and the letter „H".
The residual heat indicator
Once a cooking zone is switched off, „H" is displayed on the relevant cooking zone's display
to warn that the „cooking zone is still hot!".
Do not touch the cooking zone at this time owing to the risk of burns from resi-
dual heat, and do not place any object on it which is sensitive to heat!
When the residual heat indicator goes out, cooking zone can be touched, however keep in
mind that it may still be warmer than ambient temperature.
When there is no power, the residual heat indicator does not light up.
49