Technical Data; Noise/Vibration Information; Changing The Planer Blades - Bosch GHO 40-82 C Professional Manual Original

14 | English
(7) Belt cover
(8) Screw for belt cover
(9) Changeover lever for chip ejector direction
(10) Planer base plate
(11) V-grooves
(12) Handle (insulated gripping surface)
(13) Blade head
(14) Clamping element for planer blade
(15) Fastening screw for planer blade
(16) HM/TC planer blade
(17) Side cutter block guard
(18) Hex key
(19) Extraction hose (dia. 35 mm)
a)
(20) Chip/dust bag
a)
(21) Parallel guide
(22) Locking nut for rebate width setting
(23) Fastening screw for parallel/angle guide
a)
(24) Angle guide
(25) Locking nut for angle setting
(26) Fastening screw for rebate depth guide
a)
(27) Rebate depth guide
(28) Parking rest
a)
(29) Service station
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical data

Planer
Article number
Rated power input
Power output
No-load speed
Cutting depth
Rebate depth
Max. planing width
Weight according to
EPTA‑Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.

Noise/vibration information

Noise emission values determined according to
EN 62841‑2‑14.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 85 dB(A); sound power level
96 dB(A). Uncertainty K = 3 dB.
1 609 92A 818 | (28.06.2022)
Wear hearing protection!
Vibration total values a
determined according to EN 62841‑2‑14:
a
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
a)
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
a)
This may significantly reduce vibration and noise emissions
a)
over the total working period.
Implement additional safety measures to protect the oper-
a)
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
a)
and organising workflows correctly.
Fitting
u

Changing the planer blades

u
GHO 40‑82 C
0 601 59A 7..
Use only original Bosch HM/TC planer blades.
0 601 59A A..
The hard metal (HM/TC) planer blade has two cutting edges
W 850
and can be turned. If both cutting edges become blunt, the
W 450
planer blade (16) needs to be changed. The HM/TC planer
−1
min 14 000 blade must not be resharpened.
mm 0−4.0
Removing the planer blade (see figure A)
mm 0−24
To turn or replace the planer blade (16), turn the blade head
(13) until it is parallel to the planer base plate (10).
mm 82
➊ Loosen the two fastening screws (15) using the hex key
kg 3.2
➋ If necessary, loosen the clamping element (14) by
/II
➌ Fold the side cutter block guard (17) downwards and
Fitting the planer blade (see figure B)
The guide groove on the planer blade ensures a constant,
even height setting when changing or turning the blade.
(triax vector sum) and uncertainty K
h
2 2
= 7.5 m/s , K = 1.5 m/s .
Pull the plug out of the socket before carrying out any
work on the power tool.
Take care when changing the planer blade. Do not pick
up the planer blade by the cutting edges. You may be
injured by the sharp cutting edges.
(18) for approx. 1−2 turns.
lightly striking it with an appropriate implement, e.g. a
wooden wedge.
use a piece of wood to push the planer blade (16) to the
side and out of the blade head (13).
Bosch Power Tools