Feature Selection; Troubleshooting - Defiant MSH27920DLWDF Guía De Uso Y Cuidado

feature selection

Mode of Operation
auto Setting (motion activated)
Lights should turn ON with motion
only at night and should turn OFF
after 1-12 min. of no motion.
Dusk to Dawn Setting
(activated only at night)
Lights should turn ON for 6 hours at
dusk and then reset to Auto Setting.
Test Setting
Lights should turn ON with motion
both day and night. Lights should turn
OFF after 4 seconds.
Return to auto Setting
(motion activated)
from any of the above settings.

troubleshooting

Problem
□
Light does not No power to the fixture.
come ON with
motion at night.
□
Surrounding external ambient
light is too bright. (If so, the
unit may think it is daytime.)
□
Wiring to the unit is loose.
□
Light comes on There is motion in the
for no apparent detection zone.
reason at night.
□
Unit is in the motion
activated setting.
Mode Knob
adjustment
"Auto" MODE knob
arrow points to a time
selection within the
1m-12m time range.
MODE knob arrow points
to a time selection within
the 1m-12m time range.
MODE knob arrow
points to TEST.
"Auto" MODE knob
arrow points to a time
selection within the
1m-12m time range.
Possible Cause
9
Keep wall switch in ON position.
Keep the power to the fixture ON.
Turn power OFF and ON twice
within 3 seconds; light will
go into override mode.
Wall Switch Setting
(connected to fixture)
Keep wall switch in ON position.
Turn the power OFF
for at least 90 seconds
and then back ON.
Solution
□
Check if circuit breaker tripped.
□
Confirm wall switch is ON.
□
Re-aim the sensor head.
□
Relocate or reposition the unit away from
the light.
TURn OFF POWER BEFORE COnTInUInG.
□
Check wiring and reconnect if necessary using
wire nuts (EE) provided.
□
Make sure the sensor is not picking up moving
objects such as trees, traffic, etc.
TEST FOR yOURSElF:
□ Cover the sensor lens with cardboard to
prevent sensor from detecting motion. If the
light stays off, something in the detection
zone is triggering the sensor. If this is the
case, reduce the sensitivity.
□ If the light stays on with the sensor lens
covered, contact Customer Service.
□
Reposition the sensor.
□
Make sure "Auto" MODE knob is set between
1m-12m.
Please contact 1-866-308-3976 for further assistance.
how to Set
Power Switch
HOMEDEPOT.com