Raider Pro RDP-SBBC20 Solo Manual De Instrucciones página 14

14 www.raider.bg
and attachments may increase the risk of injury or damage to the machine.
3. ASSEMBLING THE ELEMENTS OF THE BATTERY BRUSH CUTTER AND PUTTING IT
INTO SERVICE.
Some trimmer parts are disassembled to reduce the volume of the package during transport.
Mounting the protective cover
Attach the safety cover (6) to the brush cutter base using the solo screws and the cross-head
screwdriver as shown in Figure A
Attention !!! Never use the brush cutter without first applying the protective cap.
Starting the brush cutter
If this is the first time the brush cutter is being used, make sure that the cord touches or passes the
safety cover.
The cord should be cut automatically if it is loosened to the maximum (outside the protective cover).
To achieve the required length of cord or knife, hold the button as shown in Figure B and C
ATTENTION
• Before inserting batteries into the tool, always check that the switch is activated
triggers correctly and returns to the OFF position when released.
Using a tool with a switch that does not operate properly can result in loss of control and serious
personal injury.
A lock lever is provided to prevent the switch trigger from being accidentally pulled.
To start the tool, grasp the back handle (the locking lever is released from the grip) and then pull the
switch trigger.
To stop the tool, release the switch trigger.
The tall grass should be mowed in layers, as shown in FIG. D